2005-2008 RAV4 · Service Manual RESTRAINTS

INSTALLATION

Removal / installation · Vehicles built Nov 2005 – Dec 2006

Versions by build date: Nov 2005 – Dec 2006 from Jan 2007

HINT:
A bolt without a torque specification is shown in the standard bolt chart (Click here).


1. INSTALL FRONT SEAT INNER BELT ASSEMBLY (for Power Seat)

B133641E01
  1. Install the front seat inner belt with the nut.

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }

    NOTICE:
    Do not overlap the anchor part of the seat belt and protruding part of the seat adjuster.

  1. for Driver Seat:
    Attach the 2 clamps and connect the 2 connectors.

  1. for Passenger Seat:
    Attach the 2 clamps and connect the 2 connectors.


2. INSTALL FRONT SEAT INNER BELT ASSEMBLY (for Manual Seat)

B133641E01
  1. Install the front seat inner belt with the nut.

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }

    NOTICE:
    Do not overlap the anchor part of the seat belt and protruding part of the seat adjuster.

  1. for Driver Seat:
    Attach the 2 clamps and connect the 2 connectors.

  1. for Passenger Seat:
    Attach the 3 clamps and connect the 2 connectors.


3. INSTALL FRONT SEAT CUSHION INNER SHIELD LH (for Power Seat)

  1. B131278
    Attach the clip and 3 claws to install the inner shield.

  1. Install the screw.


4. INSTALL FRONT SEAT CUSHION INNER SHIELD LH (for Manual Seat)

  1. B131226
    Attach the 3 claws to install the cushion shield.

  1. Install the 2 screws.

  1. B131222
    Connect the 2 rubber bands of the front seatback board or front seatback cover to the seat frame (with adjuster).


5. INSTALL FRONT SEAT ASSEMBLY (for Power Seat)
  1. Place the seat in the cabin.

  1. Connect the connectors under the seat.

  1. Connect the cable to the negative (-) battery terminal.

  1. B131273E01
    Operate the power seat switch knob and move the seat to the rearmost position.

  1. Tighten the 2 bolts on the front side of the seat.

    Torque:
    37 N*m{ 377 kgf*cm , 27 ft.*lbf }

    HINT:
    Tighten the 2 bolts in the order indicated in the illustration.

  1. B131274E01
    Operate the power seat switch knob and move the seat to the foremost position.

  1. Tighten the 2 bolts on the rear side of the seat.

    Torque:
    37 N*m{ 377 kgf*cm , 27 ft.*lbf }

    HINT:
    Tighten the 2 bolts in the order indicated in the illustration.

  1. B139933
    Install the front seat track bracket outer cover in the direction indicated by the arrow in the illustration and attach the 2 claws.

  1. B139934
    Install the front seat track bracket inner cover in the direction indicated by the arrow in the illustration and attach the 2 claws.


6. INSTALL FRONT SEAT ASSEMBLY (for Manual Seat)
  1. Place the seat in the cabin.

    NOTICE:
    Be careful not to damage the vehicle body.

  1. Connect the connector under the seat.

  1. Lift up the seat track adjusting handle and move the seat to the rearmost position.

  1. B131219E01
    Tighten the 2 bolts on the front side of the seat.

    Torque:
    37 N*m{ 377 kgf*cm , 27 ft.*lbf }

    HINT:
    Tighten the bolts in the order indicated in the illustration.

  1. Lift up the seat track adjusting handle and move the seat to the foremost position.

  1. B131218E01
    Tighten the 2 bolts on the rear side of the seat.

    Torque:
    37 N*m{ 377 kgf*cm , 27 ft.*lbf }

    HINT:
    Tighten the bolts in the order indicated in the illustration.


7. INSTALL SEAT TRACK BRACKET COVER OUTER FRONT LH

  1. B137714
    Install the outer cover in the direction indicated by the arrow in the illustration and attach the 2 claws.


8. INSTALL SEAT TRACK BRACKET COVER INNER FRONT LH

  1. B137716
    Install the inner cover in the direction indicated by the arrow in the illustration and attach the 2 claws.


9. INSTALL SEAT TRACK BRACKET COVER INNER FRONT RH
  1. Use the same procedures described for the LH side.


10. INSTALL SEAT TRACK BRACKET COVER OUTER FRONT RH
  1. Use the same procedures described for the LH side.


11. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
← INSPECTION (from Nov 2005)INSTALLATION (from Jan 2007) →