INSPECTION
Inspection · Vehicles built from Nov 2005
| INSPECT FRONT SEAT INNER BELT ASSEMBLY (for Front Passenger Side) |
![]() ![]() |
Measure the resistance of the buckle switch.
- Standard resistance:
Tester Connection
Condition
Specified Condition
1 - 2
Seat belt is unfastened (Apply more than 29 N (3 kgf, 71 lbf) to occupant detection sensor)
Below 100 Ω
1 - 2
Seat belt is fastened (Apply more than 29 N (3 kgf, 71 lbf) to occupant detection sensor)
1 MΩ or higher
| INSPECT OCCUPANT DETECTION SENSOR |
![]() ![]() |
Measure the resistance of the sensor.
- Standard resistance:
Condition
Specified Condition
Apply more than 29 N (3 kgf, 71 lbf) to occupant detection sensor
Below 100 Ω
Seat not occupied
1 MΩ or higher



