2005-2008 RAV4 · Service Manual BODY

INSTALLATION

Removal / installation · Vehicles built from Nov 2005


1. INSTALL HOOD LOCK CONTROL CABLE ASSEMBLY

  1. Install the cable to the clamps, wire harness protector and wire harness grommet as shown in the illustration.

    B127332E02


2. INSTALL HOOD LOCK CONTROL LEVER SUB-ASSEMBLY

  1. B135411
    Connect the cable to the lever.

  1. Attach the 3 claws to install the lever.


3. INSTALL HOOD LOCK ASSEMBLY

  1. B127327
    Connect the cable to the lock.

  1. B127328E01
    Install the lock with the 3 bolts.

    Torque:
    8.0 N*m{ 82 kgf*cm , 71 in.*lbf }

  1. Adjust the lock.

  1. w/ Hood courtesy switch:
    Connect the connector.


4. INSTALL RADIATOR SUPPORT OPENING COVER

  1. B130259
    Install the 2 clips.


5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
← REMOVAL (from Nov 2005)COMPONENTS (from Nov 2005) →