2005-2008 RAV4 · Service Manual BODY

INSTALLATION

Removal / installation · Vehicles built Nov 2005 – Dec 2006

Versions by build date: Nov 2005 – Dec 2006 Jan 2007 – Jul 2007 from Aug 2007


1. INSTALL FUEL FILLER OPENING LID LOCK RETAINER

B131390
  1. Install the lock retainer and turn it counterclockwise as shown in the illustration.


2. INSTALL FUEL LID LOCK CONTROL CABLE SUB-ASSEMBLY

  1. B131391
    Install the cable and turn it clockwise as shown in the illustration.

  1. Install the fuel lid lock open lever with the bolt.

    Torque:
    8.0 N*m{ 82 kgf*cm , 71 in.*lbf }

  1. Install the cable to the clamps as shown in the illustration.

    B131387E09


3. INSTALL FRONT FLOOR CARPET ASSEMBLY

4. INSTALL DECK TRIM SIDE PANEL ASSEMBLY LH
  1. Install the deck trim side panel.
    for Short Body (Click here)
    for Long Body (Click here)


5. INSTALL DECK TRIM SIDE PANEL ASSEMBLY RH
  1. Install the deck trim side panel.
    for Short Body (Click here)
    for Long Body (Click here)


6. INSTALL CHILD RESTRAINT SEAT TETHER ANCHOR BRACKET

7. INSTALL CHILD RESTRAINT SEAT TETHER ANCHOR COVER

8. INSTALL TETHER ANCHOR BRACKET SUB-ASSEMBLY (for Long Body)

  1. B135674
    Install the tether anchor bracket with the bolt.

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }


9. INSTALL RECLINING REMOTE CONTROL LEVER BEZEL LH

  1. B132537
    Attach the 6 claws to install the bezel.


10. INSTALL RECLINING REMOTE CONTROL LEVER BEZEL RH

  1. B135482
    Attach the 6 claws to install the bezel.


11. INSTALL REAR FLOOR FINISH PLATE
  1. Install the rear floor finish plate.
    for Short Body (Click here)
    for Long Body (Click here)


12. INSTALL BACK DOOR WEATHERSTRIP

13. INSTALL REAR FLOOR NO. 1 MAT SUPPORT SIDE PLATE
  1. Install the rear floor No. 1 mat support side plate.
    for Short Body (Click here)
    for Long Body (Click here)


14. INSTALL JACK CARRIER ASSEMBLY (for Short Body)

  1. B129715
    Install the jack carrier with the 7 clips.


15. INSTALL REAR FLOOR NO. 2 BOARD

16. INSTALL REAR FLOOR NO. 3 BOARD

17. INSTALL DECK BOARD ASSEMBLY

18. INSTALL REAR FLOOR NO. 1 BOARD

19. INSTALL TONNEAU COVER ASSEMBLY

20. INSTALL PACKAGE TRAY TRIM POCKET SUB-ASSEMBLY

21. INSTALL LOWER CENTER PILLAR GARNISH LH
  1. Install the lower center pillar garnish.
    for Short Body (Click here)
    for Long Body (Click here)


22. INSTALL LOWER CENTER PILLAR GARNISH RH
  1. Install the lower center pillar garnish.
    for Short Body (Click here)
    for Long Body (Click here)


23. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH

24. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP RH

25. INSTALL REAR DOOR SCUFF PLATE LH
  1. Install the rear door scuff plate.
    for Short Body (Click here)
    for Long Body (Click here)


26. INSTALL REAR DOOR SCUFF PLATE RH
  1. Install the rear door scuff plate.
    for Short Body (Click here)
    for Long Body (Click here)


27. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP LH

28. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP RH

29. INSTALL COWL SIDE TRIM BOARD LH
  1. Install the cowl side trim board.
    for Short Body (Click here)
    for Long Body (Click here)


30. INSTALL COWL SIDE TRIM BOARD RH
  1. Install the cowl side trim board.
    for Short Body (Click here)
    for Long Body (Click here)


31. INSTALL FRONT DOOR SCUFF PLATE LH
  1. Install the front door scuff plate.
    for Short Body (Click here)
    for Long Body (Click here)


32. INSTALL FRONT DOOR SCUFF PLATE RH
  1. Install the front door scuff plate.
    for Short Body (Click here)
    for Long Body (Click here)


33. INSTALL REAR CONSOLE BOX SUB-ASSEMBLY

B129878
  1. Connect the connector.

  1. Install the rear console box with the 2 bolts and 2 screws.

  1. Install the console box carpet.


34. INSTALL NO. 1 INSTRUMENT PANEL BRACKET COVER INNER LH

B129877
  1. Attach the 2 claws to install the instrument panel bracket cover.


35. INSTALL NO. 1 INSTRUMENT PANEL BRACKET COVER INNER RH

B129876
  1. Attach the 2 claws to install the instrument panel bracket cover.


36. INSTALL CONSOLE REAR END PANEL

B129879
  1. Attach the 6 claws to install the console rear end panel.


37. INSTALL UPPER REAR CONSOLE PANEL SUB-ASSEMBLY

B129880
  1. Connect the connector.

  1. Attach the 4 clips to install the upper rear console panel.


38. INSTALL CONSOLE CUP HOLDER BOX

B129881
  1. Attach the 2 clips to install the cup holder box.

  1. Install the 2 screws.


39. INSTALL SWITCH BASE

B129882
  1. Connect the connectors.

  1. Attach the 2 clips and 2 claws to install the switch base.


40. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY

B129883
  1. Automatic transaxle:
    Connect the connector.

  1. Attach the 2 clips and 4 claws to install the upper console panel.

  1. Install the shift lever knob.


41. INSTALL NO. 2 CONSOLE UPPER PANEL GARNISH

B129884
  1. Attach the 4 clips to install the upper panel garnish.


42. INSTALL NO. 1 CONSOLE UPPER PANEL GARNISH

B129885
  1. Attach the 4 clips to install the upper panel garnish.


43. INSTALL REAR NO. 1 SEAT ASSEMBLY LH
  1. Install the rear No. 1 seat (Click here).


44. INSTALL REAR NO. 1 SEAT ASSEMBLY RH
  1. Install the rear No. 1 seat (Click here).


45. INSTALL FRONT SEAT ASSEMBLY LH
  1. Install the front seat.
    for Manual Seat (Click here)
    for Power seat (Click here)


46. INSTALL FRONT SEAT ASSEMBLY RH
  1. Install the front seat.
    for Manual Seat (Click here)
    for Power seat (Click here)


47. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

48. CHECK SRS WARNING LIGHT
  1. Check the SRS warning light (Click here).

← REMOVAL (from Jan 2007)INSTALLATION (Jan 2007 – Jul 2007) →