INSTALLATION
Removal / installation · Vehicles built Nov 2005 – Jul 2008
Versions by build date: Nov 2005 – Jul 2008 from Aug 2008
- HINT:
- Use the same procedures for the RH and LH sides.
- The procedures listed below are for the LH side.
| 1.
INSTALL HEADLIGHT ASSEMBLY LH |
 |
Connect the connectors with the headlight.
Install the 3 screws and bolt.
| 2.
INSTALL FRONT BUMPER REINFORCEMENT SUB-ASSEMBLY UPPER |
 |
Install the reinforcement and install the 2 bolt.
Connect the 2 horns connectors.
| 3.
INSTALL FRONT BUMPER COVER
|
 |
- Put protective tape under the front fender and headlight.
Install the 4 clips.
- Install the hood cushion center.
w/ Headlight Cleaner:
Connect the headlight cleaner.
w/ Fog Light:
Connect the 2 fog light connectors.
- Attach the 4 claws to install the bumper cover.
- Install the 8 screws.
| 4.
INSTALL RADIATOR SUPPORT OPENING COVER
|
 |
- Install the 2 clips.
| 5.
INSTALL FRONT FENDER LINER RH
|
 |
- HINT:
- Use the same procedures described for the LH side.
| 6.
INSTALL FRONT FENDER LINER LH
|
 |
- Install the clip and bumper retainer.
Install the bolt.
-
Torque:
- 6.0 N*m{
61 kgf*cm
, 53 in.*lbf
}
| 7.
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
|
| 8.
ADJUST HEADLIGHT AIMING |
 |
Adjust the headlight aiming (Click here ).