INSTALLATION
Removal / installation · Vehicles built from Aug 2008
Versions by build date: Nov 2005 – Jul 2008 from Aug 2008
| 1.
INSTALL HEADLIGHT ASSEMBLY LH |
 |
Connect the connectors with the headlight.
Install the 3 screws and bolt.
| 2.
INSTALL FRONT BUMPER UPPER REINFORCEMENT SUB-ASSEMBLY |
 |
Install the reinforcement and install the 2 bolts.
Connect the 2 horns connectors.
| 3.
INSTALL FRONT BUMPER COVER
|
 |
w/ Fog Light:
Connect the 2 fog light connectors.
Attach the 4 claws to install the bumper cover.
- Install the 8 screws and 4 clips.
- Install the retainer.
- HINT:
- Use the same procedure for the RH and LH sides.
Position the groove on the pin hold clip vertically and insert the clip to install it.
- NOTICE:
- Make sure that the groove on the pin hold clip is positioned vertically.
- HINT:
- Use the same procedure for the RH and LH sides.
| 4.
INSTALL FRONT FENDER FRONT SPLASH SHIELD LH (w/ Diffuser)
|
 |
Install the splash shield with the nut, bolt and screw.
| 5.
INSTALL FRONT FENDER FRONT SPLASH SHIELD RH (w/ Diffuser)
|
 |
- HINT:
- Use the procedure described for the LH side.
| 6.
INSTALL RADIATOR GRILLE PROTECTOR
|
 |
Install the 2 radiator grille protectors.
| 7.
INSTALL HOOD CENTER CUSHION
|
 |
Install the hood cushion.
| 8.
INSTALL RADIATOR SUPPORT OPENING COVER
|
 |
Install the radiator support opening cover with the 9 clips.
| 9.
ADJUST HEADLIGHT AIMING |
 |
Adjust the headlight aiming (Click here ).