REMOVAL
Removal / installation · Vehicles built from Aug 2008
Versions by build date: Nov 2005 – Jul 2008 from Aug 2008
| 1.
REMOVE RADIATOR SUPPORT OPENING COVER
|
 |
Remove the 9 clips and radiator support opening cover.
| 2.
REMOVE HOOD CENTER CUSHION
|
 |
- Using a clip remover, remove the center hood cushion.
| 3.
REMOVE RADIATOR GRILLE PROTECTOR
|
 |
Remove the 2 radiator grille protectors.
| 4.
REMOVE FRONT FENDER FRONT SPLASH SHIELD LH (w/ Diffuser)
|
 |
Remove the screw, bolt, nut and splash shield.
| 5.
REMOVE FRONT FENDER FRONT SPLASH SHIELD RH (w/ Diffuser)
|
 |
- HINT:
- Use the procedure described for the LH side.
| 6.
REMOVE FRONT BUMPER COVER
|
 |
Using a screwdriver, turn the pin hold clip 90° and remove the pin hold clip.
- HINT:
- Tape the screwdriver tip before use.
- Use the same procedure for the RH and LH sides.
Remove the retainer.
- HINT:
- Use the same procedure for the RH and LH sides.
- Put protective tape around the bumper cover.
Using a clip remover, remove the 4 clips.
Remove the 8 screws.
- Detach the 4 claws and remove the bumper cover.
w/ Fog Light:
Disconnect the 2 fog light connectors.
| 7.
REMOVE FRONT BUMPER UPPER REINFORCEMENT SUB-ASSEMBLY |
 |
Disconnect the 2 horn connectors.
Remove the 2 bolts and reinforcement.
| 8.
REMOVE HEADLIGHT ASSEMBLY |
 |
Remove the 3 screws and bolt.
Disconnect the connectors and remove the headlight.