2005-2008 RAV4 · Service Manual BODY

INSPECTION

Inspection · Vehicles built from Nov 2005


INSPECT OUTER MIRROR SWITCH ASSEMBLY (w/ Retract Mirror)

B130152E01
  1. The L position of the left/right adjustment switch: Measure the resistance of the mirror switch.

    Standard resistance (for left side):
    Tester Connection
    Switch Condition
    Specified Condition
    4 (VL) - 8 (B)
    6 (M+) - 7 (E)
    UP
    Below 1 Ω
    OFF
    10 kΩ or higher
    4 (VL) - 7 (E)
    6 (M+) - 8 (B)
    DOWN
    Below 1 Ω
    OFF
    10 kΩ or higher
    5 (HL) - 8 (B)
    6 (M+) - 7 (E)
    LEFT
    Below 1 Ω
    OFF
    10 kΩ or higher
    5 (HL) - 7 (E)
    6 (M+) - 8 (B)
    RIGHT
    Below 1 Ω
    OFF
    10 kΩ or higher

    If the result is not as specified, replace the switch assembly.

  1. The R position of the left/right adjustment switch: Measure the resistance of the mirror switch.

    Standard resistance (for right side):
    Tester Connection
    Switch Condition
    Specified Condition
    3 (VR) - 8 (B)
    6 (M+) - 7 (E)
    UP
    Below 1 Ω
    OFF
    10 kΩ or higher
    3 (VR) - 7 (E)
    6 (M+) - 8 (B)
    DOWN
    Below 1 Ω
    OFF
    10 kΩ or higher
    2 (HR) - 8 (B)
    6 (M+) - 7 (E)
    LEFT
    Below 1 Ω
    OFF
    10 kΩ or higher
    2 (HR) - 7 (E)
    6 (M+) - 8 (B)
    RIGHT
    Below 1 Ω
    OFF
    10 kΩ or higher

    If the result is not as specified, replace the switch assembly.

  1. Measure the resistance of the retract switch.

    OK:
    Tester Connection
    Switch Condition
    Specified Condition
    10 (MF) - 8 (B)
    9 (MR) - 7 (E)
    RETURN
    Below 1 Ω
    10 (MF) - 7 (E)
    9 (MR) - 8 (B)
    RETRACT
    Below 1 Ω

    If the result is not as specified, replace the switch.


INSPECT OUTER MIRROR SWITCH ASSEMBLY (w/o Retract Mirror)

B059702E06
  1. The L position of the left/right adjustment switch: Measure the resistance of the mirror switch.

    Standard resistance (for left side):
    Tester Connection
    Switch Condition
    Specified Condition
    4 (VL) - 8 (B)
    6 (M+) - 7 (E)
    UP
    Below 1 Ω
    OFF
    10 kΩ or higher
    4 (VL) - 7 (E)
    6 (M+) - 8 (B)
    DOWN
    Below 1 Ω
    OFF
    10 kΩ or higher
    5 (HL) - 8 (B)
    6 (M+) - 7 (E)
    LEFT
    Below 1 Ω
    OFF
    10 kΩ or higher
    5 (HL) - 7 (E)
    6 (M+) - 8 (B)
    RIGHT
    Below 1 Ω
    OFF
    10 kΩ or higher

    If the result is not as specified, replace the switch assembly.

  1. The R position of the left/right adjustment switch: Measure the resistance of the mirror switch.

    Standard resistance (for right side):
    Tester Connection
    Switch Condition
    Specified Condition
    3 (VR) - 8 (B)
    6 (M+) - 7 (E)
    UP
    Below 1 Ω
    OFF
    10 kΩ or higher
    3 (VR) - 7 (E)
    6 (M+) - 8 (B)
    DOWN
    Below 1 Ω
    OFF
    10 kΩ or higher
    2 (HR) - 8 (B)
    6 (M+) - 7 (E)
    LEFT
    Below 1 Ω
    OFF
    10 kΩ or higher
    2 (HR) - 7 (E)
    6 (M+) - 8 (B)
    RIGHT
    Below 1 Ω
    OFF
    10 kΩ or higher

    If the result is not as specified, replace the switch assembly.

← INSTALLATION (from Aug 2008)PRECAUTION (Nov 2005 – Dec 2006) →