REMOVAL
Removal / installation · Vehicles built Jan 2007 – Jul 2007
Versions by build date: Nov 2005 – Dec 2006 Jan 2007 – Jul 2007 from Aug 2007
| 1.
REMOVE MANUAL TRANSAXLE ASSEMBLY |
 |
Remove the manual transaxle (Click here).
| 2.
REMOVE CLUTCH RELEASE FORK SUB-ASSEMBLY |
 |
- Remove the clutch release fork with clutch release bearing from the transaxle.
| 3.
REMOVE CLUTCH RELEASE BEARING ASSEMBLY |
 |
- Remove the clutch release bearing from the clutch release fork.
| 4.
REMOVE RELEASE FORK SUPPORT |
 |
- Remove the release fork support from the transaxle.
| 5.
REMOVE CLUTCH RELEASE FORK BOOT |
 |
- Remove the clutch release fork boot from the transaxle case.
| 6.
REMOVE CLUTCH COVER ASSEMBLY |
 |
- Align the matchmarks on the clutch cover and flywheel.
Loosen each set bolt 180°at a time until the spring tension is released.
- NOTICE:
- Following the order in the illustration, make sure to uniformly loosen the bolts 180°at a time.
Remove the set bolts, and pull off the clutch cover.
- NOTICE:
- Do not drop the clutch disc.
| 7.
REMOVE CLUTCH DISC ASSEMBLY |
 |
- NOTICE:
- Keep the lining part of the clutch disc, the pressure plate and the surface of the flywheel away from oil and foreign matter.