2005-2008 RAV4 · Service Manual TRANSMISSION

REMOVAL

Removal / installation · Vehicles built from Aug 2007

Versions by build date: Nov 2005 – Dec 2006 Jan 2007 – Jul 2007 from Aug 2007


1. REMOVE MANUAL TRANSAXLE ASSEMBLY
  1. Remove the manual transaxle (Click here).


2. REMOVE CLUTCH RELEASE FORK SUB-ASSEMBLY

  1. C113576
    Remove the clutch release fork with clutch release bearing from the transaxle.


3. REMOVE CLUTCH RELEASE BEARING ASSEMBLY

  1. C116601
    Remove the clutch release bearing from the clutch release fork.


4. REMOVE RELEASE FORK SUPPORT

  1. C113601
    Remove the release fork support from the transaxle.


5. REMOVE CLUTCH RELEASE FORK BOOT

  1. C113599E01
    Remove the clutch release fork boot from the transaxle case.


6. REMOVE CLUTCH COVER ASSEMBLY

  1. C113575E07
    Align the matchmarks on the clutch cover and flywheel.

  1. Loosen each set bolt 180°at a time until the spring tension is released.

    NOTICE:
    Following the order in the illustration, make sure to uniformly loosen the bolts 180°at a time.

  1. Remove the set bolts, and pull off the clutch cover.

    NOTICE:
    Do not drop the clutch disc.


7. REMOVE CLUTCH DISC ASSEMBLY

NOTICE:
Keep the lining part of the clutch disc, the pressure plate and the surface of the flywheel away from oil and foreign matter.

← REMOVAL (Jan 2007 – Jul 2007)INSPECTION (from Nov 2005) →