DISASSEMBLY
Removal / installation · Vehicles built from Nov 2005
| 1. REMOVE FRONT DIFFERENTIAL CASE FRONT TAPERED ROLLER BEARING |
Using SST, remove the tapered roller bearing from the front differential case.

- SST
- 09950-00020
09950-00030
09950-40011 (09957-04010)
09950-60010 (09951-00560)
| 2. REMOVE FRONT DIFFERENTIAL CASE REAR TAPERED ROLLER BEARING |
Using SST, remove the tapered roller bearing from the rear differential case.

- SST
- 09950-00020
09950-00030
09950-40011 (09957-04010)
09950-60010 (09951-00490)
| 3. REMOVE FRONT DIFFERENTIAL RING GEAR |
Put matchmarks on the front differential ring gear and front differential case.

Remove the 16 bolts.

Using a plastic-faced hammer, tap out the front differential case.
| 4. REMOVE FRONT DIFFERENTIAL PINION SHAFT STRAIGHT PIN |
Using SST and a hammer, unstake the staked part of the front differential case.

- SST
- 09930-00010
Using a pin punch and hammer, tap out the straight pin from the front differential case.
| 5. REMOVE NO. 1 FRONT DIFFERENTIAL PINION SHAFT |
Remove the No. 1 front differential pinion shaft from the front differential case.

| 6. REMOVE FRONT DIFFERENTIAL SIDE GEAR |
Remove the 2 front differential pinions, 2 front differential pinion thrust washers, 2 front differential side gears and 2 front differential side gear thrust washers from the front differential case.

- HINT:
- Remove the 2 pinion thrust washers and side gear thrust washers while turning the front differential pinion.
