REMOVAL
Removal / installation · Vehicles built from Nov 2005
| 1.
REMOVE HOOD INSULATOR |
 |
- Using a clip remover, remove the 7 clips and hood insulator.
| 2.
REMOVE WASHER NOZZLE SUB-ASSEMBLY |
|
| 3.
DISCONNECT WINDSHIELD WASHER HOSE |
 |
- Detach the 3 clamps and disconnect the washer hose.
| 4.
REMOVE HOOD AUXILIARY CATCH HOOK ASSEMBLY |
 |
- Remove the bolt and hook.
| 5.
REMOVE HOOD SUB-ASSEMBLY |
 |
- Remove the 4 bolts and hood.
| 6.
REMOVE HOOD HINGE ASSEMBLY LH |
 |
Remove the 2 bolts and hood hinge.
| 7.
REMOVE HOOD HINGE ASSEMBLY RH |
 |
Remove the 2 bolts and hood hinge.
| 8.
REMOVE RADIATOR SUPPORT OPENING COVER
|
 |
- Remove the 2 clips.
Partially remove the radiator support opening cover.
- HINT:
- It is not necessary to fully remove the radiator support opening cover. Partially remove it so that the bumper cover can be removed later.
| 9.
REMOVE ENGINE HOOD LOCK STRIKER ASSEMBLY |
 |
- Remove the 3 bolts and hood lock striker.
| 10.
REMOVE CUSHION RUBBER |
 |
Remove the 4 cushion rubbers.