INSPECTION
Inspection · Vehicles built from Nov 2005
| INSPECT CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY |
Measure the resistance of the oil control valve.

- Standard resistance:
Tester Connection
Specified Condition
1 (+B) - 2 (GND)
6.9 to 7.9 Ω at 20°C (68°F)
Check the operation.

Apply battery voltage across the terminals and check that the spool valve operates.
- NOTICE:
- Check that the spool valve is not stuck.
- HINT:
- The spool valve may not return if foreign objects are caught in it. This may cause subtle pressure leaks to the advance side, and a DTC may be set.
