INSPECTION
Inspection · Vehicles built from Aug 2007
| INSPECT ENGINE COOLANT TEMPERATURE SENSOR |
Measure the resistance of the sensor.


- Standard resistance:
Tester Connection
Condition
Specified Condition
1 (E2) - 2 (THW)
20°C (68°F)
2.32 to 2.59 kΩ
1 (E2) - 2 (THW)
80°C (176°F)
0.310 to 0.326 kΩ
- NOTICE:
- If checking the sensor in water, be careful not to allow water to contact the terminals. After checking, wipe the water off the sensor.
