REMOVAL
Removal / installation · Vehicles built from Aug 2007
| 1. REMOVE NO. 1 ENGINE UNDER COVER |
Remove the 2 bolts, 4 screw, 10 clips and under cover.
| 2. DRAIN ENGINE COOLANT |
Loosen the radiator drain cock plug.
- HINT:
- Collect the coolant in a container and dispose of it according to the regulations in your area.
Remove the radiator reservoir cap.
- CAUTION:
- Do not remove the radiator reservoir cap while the engine and radiator are still hot. Pressurized, hot engine coolant and steam may be released and cause serious burns.
Loosen the 2 cylinder block drain cock plugs.


| 3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 4. REMOVE ENGINE COOLANT TEMPERATURE SENSOR |
Disconnect the sensor connector.

Using SST, remove the sensor and gasket.
- SST
- 09817-33190
