2005-2008 RAV4 · Service Manual ENGINE

ON-VEHICLE INSPECTION

Inspection · Vehicles built from Nov 2005


CHECK THROTTLE BODY
  1. Check the throttle control motor operating sounds.

    1. Turn the ignition switch on (IG).

    2. When pressing the accelerator pedal, check the operating sound of the running motor. Make sure that no friction noises emit from the motor.
      If friction noise exists, replace the throttle body.

  1. B127990E01
    Check the throttle position sensor.

    1. Connect the intelligent tester to the DLC3.

    2. Turn the ignition switch on (IG).

    3. Push the intelligent tester main switch ON.

    4. Enter the following menus: Powertrain / Engine and ECT / Data List / Throttle Position Sensor.

    5. Depress the accelerator pedal. When the throttle valve is fully opened, check that the value of "Throttle Position Sensor" is within the specification.

      Standard throttle valve opening percentage:
      60% or more

      NOTICE:
      When checking the standard throttle valve opening percentage, the shift lever should be in the N position.

      If the percentage is less than 60%, replace the throttle body.

← COMPONENTS (from Nov 2005)REMOVAL (from Nov 2005) →