ON-VEHICLE INSPECTION
Inspection · Vehicles built from Aug 2007
| INSPECT NO. 1 FAN RELAY |
Measure the resistance of the relay.

- Standard resistance:
Tester Connection
Specified Condition
3 - 5
10 kΩ or higher
3 - 5
Below 1 Ω
(when battery voltage is applied to terminals 1 and 2)
- If the result is not as specified, replace the relay.
| INSPECT NO. 2 FAN RELAY |
Measure the resistance of the relay.

- Standard resistance:
Tester Connection
Specified Condition
3 - 5
10 kΩ or higher
3 - 5
Below 1 Ω
(when battery voltage is applied to terminals 1 and 2)
- If the result is not as specified, replace the relay.
