ON-VEHICLE INSPECTION
Inspection · Vehicles built from Aug 2007
| CHECK COOLING FAN ECU |
Disconnect the A64 and A65 ECU connectors.

Measure the voltage and resistance according to the value(s) in the table below.
- Standard voltage:
Tester Connection
Condition
Specified Condition
A64-3 (+B1) - Body ground
Ignition switch ON
11 to 14 V
A65-3 (+B2) - Body ground
Ignition switch ON
11 to 14 V
- Standard resistance:
Tester Connection
Condition
Specified Condition
A64-1 (E1) - Body ground
Always
Below 1 Ω
A65-1 (E2) - Body ground
Always
Below 1 Ω
Connect the A64 and A65 ECU connectors.
