2005-2008 RAV4 · Service Manual ENGINE

REMOVAL

Removal / installation · Vehicles built Jan 2007 – Jul 2007

Versions by build date: Nov 2005 – Dec 2006 Jan 2007 – Jul 2007 from Aug 2007


1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.


2. REMOVE ENGINE ASSEMBLY
  1. Remove the engine assembly from the vehicle (Click here).


3. REMOVE NO. 1 MANIFOLD CONVERTER INSULATOR

  1. A114857
    Remove the 5 bolts and manifold converter insulator.


4. REMOVE NO. 2 MANIFOLD CONVERTER INSULATOR

  1. A114858
    Remove the 3 bolts and manifold converter insulator.


5. REMOVE EXHAUST MANIFOLD CONVERTER SUB-ASSEMBLY

  1. A110771
    Disconnect the 2 exhaust gas temperature sensor connectors.

  1. A110767
    Remove the bolt, nut and No. 1 manifold stay.

  1. A110790
    Remove the 3 bolts and No. 2 manifold stay.

  1. A110768
    Remove the 2 bolts, nut and No. 2 exhaust manifold stay.

  1. A110789
    Remove the 3 nuts, manifold converter and gasket.


6. REMOVE EXHAUST GAS TEMPERATURE SENSOR (for Upper Side)

  1. A116325E02
    Using SST, loosen the union nut and remove the sensor from the manifold converter.
    SST
    09023-38401  


7. REMOVE EXHAUST GAS TEMPERATURE SENSOR (for Lower Side)

  1. A116326E01
    Using SST, loosen the union nut and remove the sensor from the manifold converter.
    SST
    09023-38401  

  1. A116327
    Remove the 2 bolts and sensor.

← REMOVAL (Nov 2005 – Dec 2006)REMOVAL (from Aug 2007) →