2005-2008 RAV4 · Service Manual ENGINE

REMOVAL

Removal / installation · Vehicles built from Aug 2007

Versions by build date: Jan 2007 – Jul 2007 from Aug 2007


1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.


2. REMOVE ENGINE ASSEMBLY
  1. Remove the engine assembly from the vehicle (Click here).


3. REMOVE NO. 1 MANIFOLD CONVERTER INSULATOR

  1. A114857
    Remove the 5 bolts and manifold converter insulator.


4. REMOVE NO. 2 MANIFOLD CONVERTER INSULATOR

  1. A114858
    Remove the 3 bolts and manifold converter insulator.


5. REMOVE EXHAUST MANIFOLD CONVERTER SUB-ASSEMBLY

  1. A110771
    Disconnect the 2 exhaust gas temperature sensor connectors.

  1. A160474
    Remove the bolt, nut and No. 1 manifold stay.

  1. A110790
    Remove the 3 bolts and No. 2 manifold stay.

  1. A110768
    Remove the 2 bolts, nut and No. 2 exhaust manifold stay.

  1. A110789
    Remove the 3 nuts, manifold converter and gasket.


6. SEPARATE NO. 2 WATER BY-PASS HOSE

  1. A116279
    Using pliers, grip the claw of the clip and slide the clip to separate the No. 2 water by-pass hose.

    HINT:
    Place a container under the connection before separating the No. 2 water by-pass hose because coolant in the hose may spill out.


7. REMOVE EGR COOLER ASSEMBLY

  1. A110787
    Disconnect the vacuum hose from the No. 2 EGR valve.

  1. A114995
    Remove the 4 bolts.

  1. Remove the 2 bolts, 2 nuts, EGR cooler, 2 gaskets and O-ring.

  1. A114901
    Remove the 2 bolts and 2 nuts.

  1. Disassemble the No. 1 EGR pipe, No. 2 EGR valve, EGR cooler and 2 gaskets.

← REMOVAL (Jan 2007 – Jul 2007)INSTALLATION (Jan 2007 – Jul 2007) →