INSPECTION
Inspection · Vehicles built from Nov 2005
| INSPECT VACUUM SWITCHING VALVE (for EGR COOLER BY-PASS SWITCHING VALVE) |
Measure the resistance of the VSV.

- Standard resistance:
Tester Connection
Specified Condition
1 - 2
28.3 to 31.1 Ω
1 - Body ground
10 MΩ or higher
2 - Body ground
Check VSV operation.

Check that air does not flow from the port as shown in the illustration.
If the result is not as specified, replace the VSV assembly.
Apply battery voltage across the terminals.

Check that air flows from the port as shown in the illustration.
If the result is not as specified, replace the VSV assembly.
