2005-2008 RAV4 · Service Manual ENGINE

REMOVAL

Removal / installation · Vehicles built from Nov 2005


1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.


2. REMOVE NO. 1 ENGINE COVER

  1. A123518
    Detach the 4 clips and remove the engine cover.


3. REMOVE VACUUM SWITCHING VALVE (for EGR COOLER BY-PASS SWITCHING VALVE)

  1. A110791
    Pinch the clip as illustrated, then pull out the VSV connector.

  1. Disconnect the 2 vacuum hoses.

  1. Using a 5 mm hexagon socket wrench, remove the 2 bolts and VSV.

← COMPONENTS (from Nov 2005)INSPECTION (from Nov 2005) →