INSTALLATION
Removal / installation · Vehicles built Jan 2007 – Jul 2007
Versions by build date: Nov 2005 – Dec 2006 Jan 2007 – Jul 2007 from Aug 2007
| 1. INSTALL GENERATOR ASSEMBLY |
Install the generator with the 3 bolts.

- Torque:
- 25 N*m{ 255 kgf*cm , 18 ft.*lbf }
- NOTICE:
- Be careful that the wire harness of the crankshaft position sensor does not get caught between the cylinder block and generator when installing the generator.
Connect the generator wire with the nut and bolt.
- Torque:
- 9.8 N*m{ 100 kgf*cm , 87 in.*lbf } for nut
- 7.7 N*m{ 79 kgf*cm , 68 in.*lbf } for bolt
Install the terminal cap.
Connect the generator connector.
| 2. INSTALL FRONT DRIVE SHAFT ASSEMBLY RH |
Install the front drive shaft (Click here).
| 3. INSTALL FAN AND GENERATOR V BELT |
Install the belt (Click here).
| 4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
