INSTALLATION
Removal / installation · Vehicles built from Nov 2005
- HINT:
- When installing the spoiler, heat the vehicle body and spoiler using a heat light.
- Standard heating temperature:
Item
|
Specified Condition
|
Vehicle body
|
40 to 60°C (104 to 140°F)
|
Spoiler
|
20 to 30°C (68 to 86°F)
|
- NOTICE:
- Do not heat the body and spoiler excessively.
| 1.
INSTALL CENTER STOP LIGHT |
 |
- Install the center stop light with the 2 screws.
| 2.
INSTALL REAR SPOILER |
 |
Clean the vehicle body surface.
Using a heat light, heat the vehicle body surface.
If reusing the spoiler:
Clean the spoiler.
Using a heat light, heat the spoiler.
Connect the center stop light connector.
- Install the spoiler with 3 clips.
- Install the 3 bolts.
-
Torque:
- 7.5 N*m{
76 kgf*cm
, 66 in.*lbf
}
| 3.
INSTALL BACK DOOR CENTER GARNISH
|
 |
- Attach the 4 claws and 4 clips to install the garnish.
| 4.
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
|