REMOVAL
Removal / installation · Vehicles built from Nov 2005
- HINT:
- When removing the spoiler, heat the vehicle body and spoiler using a heat light.
- Standard heating temperature:
Item
|
Specified Condition
|
Vehicle body
|
40 to 60°C (104 to 140°F)
|
Spoiler
|
20 to 30°C (68 to 86°F)
|
- NOTICE:
- Do not heat the vehicle body and spoiler excessively.
| 1.
DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
 |
- CAUTION:
- Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
| 2.
REMOVE BACK DOOR CENTER GARNISH
|
 |
- Using a screwdriver, detach the 4 claws and 4 clips and remove the garnish.
- HINT:
- Tape the screwdriver tip before use.
| 3.
REMOVE REAR SPOILER |
 |
- Remove the 3 bolts.
- Remove the 3 clips and spoiler.
Disconnect the center stop light connector and remove the rear spoiler.
| 4.
REMOVE CENTER STOP LIGHT |
 |
- Remove the 2 screws and center stop light.