INSTALLATION
Removal / installation · Vehicles built Nov 2005 – Jul 2008
Versions by build date: Nov 2005 – Jul 2008 from Aug 2008
| 1.
INSTALL HIGH PITCHED HORN |
 |
Place the stay onto the baffle part of the radiator support upper, and then install the horn with the bolt.
-
Torque:
- 19.5 N*m{
199 kgf*cm
, 14 ft.*lbf
}
Connect the horn connector.
| 2.
INSTALL FRONT BUMPER COVER
|
 |
- Put protective tape under the front fender and headlight.
Install the 4 clips.
- Install the hood cushion center.
w/ Headlight Cleaner:
Connect the headlight cleaner.
w/ Fog Light:
Connect the 2 fog light connectors.
- Attach the 4 claws to install the bumper cover.
- Install the 8 screws.
| 3.
INSTALL FRONT FENDER LINER RH
|
 |
- HINT:
- Use the same procedures described for the LH side.
| 4.
REMOVE FRONT FENDER LINER LH
|
 |
- Install the clip and bumper retainer.
Install the bolt.
-
Torque:
- 6.0 N*m{
61 kgf*cm
, 53 in.*lbf
}
| 5.
INSTALL RADIATOR SUPPORT OPENING COVER
|
 |
- Install the 2 clips.