2005-2008 RAV4 · Service Manual BODY ELECTRICAL

INSTALLATION

Removal / installation · Vehicles built from Aug 2008

Versions by build date: Nov 2005 – Jul 2008 from Aug 2008


1. INSTALL HIGH PITCHED HORN ASSEMBLY

E173376
  1. Install the horn with the bolt.

    Torque:
    19.5 N*m{ 199 kgf*cm , 14 ft.*lbf }

  1. Connect the horn connector.


2. INSTALL FRONT BUMPER COVER

B208306
  1. w/ Fog Light:
    Connect the 2 fog light connectors.

  1. Attach the 4 claws to install the bumper cover.

  1. B209171
    Install the 8 screws and 4 clips.

  1. B209204
    Install the retainer.

    HINT:
    Use the same procedure for the RH and LH sides.

  1. Position the groove on the pin hold clip vertically and insert the clip to install it.

    NOTICE:
    Make sure that the groove on the pin hold clip is positioned vertically.

    HINT:
    Use the same procedure for the RH and LH sides.


3. INSTALL FRONT FENDER FRONT SPLASH SHIELD LH (w/ Diffuser)

B208332
  1. Install the splash shield with the nut, bolt and screw.


4. INSTALL FRONT FENDER FRONT SPLASH SHIELD RH (w/ Diffuser)

HINT:
Use the procedure described for the LH side.


5. INSTALL RADIATOR GRILLE PROTECTOR

B209174
  1. Install the 2 radiator grille protectors.


6. INSTALL CENTER HOOD CUSHION

B209173
  1. Install the hood cushion.


7. INSTALL RADIATOR SUPPORT OPENING COVER

B209240
  1. Install the radiator support opening cover with the 9 clips.

← INSTALLATION (Nov 2005 – Jul 2008)COMPONENTS (from Nov 2005) →