2005-2008 RAV4 · Service Manual ENGINE

INSTALLATION

Removal / installation · Vehicles built from Nov 2005


1. INSTALL DIESEL THROTTLE BODY ASSEMBLY

  1. A124890
    Install a new gasket and the diesel throttle body with the 2 nuts and 2 bolts.

    Torque:
    21 N*m{ 214 kgf*cm , 15 ft.*lbf }

  1. Connect the throttle position sensor connector.

  1. Connect the throttle motor connector.


2. INSTALL NO. 3 AIR HOSE

  1. A124889
    Install the No. 3 air hose to the No. 2 air tube and throttle body.

  1. Tighten the 2 hose clamps.

    Torque:
    6.3 N*m{ 64 kgf*cm , 56 in.*lbf }


3. INSTALL NO. 1 ENGINE UNDER COVER
  1. Install the engine under cover with the 12 clips and 4 bolts.


4. INSTALL NO. 1 ENGINE COVER

  1. A123518
    Attach the 4 clips to install the engine cover.


5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
← INSPECTION (from Nov 2005)COMPONENTS (from Nov 2005) →