2005-2008 RAV4 · Service Manual ENGINE

ON-VEHICLE INSPECTION

Inspection · Vehicles built from Nov 2005


INSPECT DIESEL THROTTLE BODY ASSEMBLY
  1. Inspect the throttle position sensor.

    1. Connect the intelligent tester to the DLC3.

    2. Turn the ignition switch on (IG).

    3. Turn the intelligent tester on.

    4. Enter the following menu items: Powertrain / Engine and ECT / Data List / Throttle Position.

    5. When the throttle valve is fully opened, check that the value of "Throttle Position" is within the specification.

      Standard throttle valve opening percentage:
      Tester Display
      Condition
      Specified Condition
      Throttle Position
      Always
      60% or more

      CAUTION:
      When checking the standard throttle valve opening percentage, the shift lever should be in the neutral position.

← COMPONENTS (from Nov 2005)REMOVAL (from Nov 2005) →