2005-2008 RAV4 · Service Manual BODY ELECTRICAL

INSTALLATION

Removal / installation · Vehicles built from Nov 2005


1. INSTALL REAR WIPER RUBBER

B117904E03
  1. Install the No. 1 and No. 2 backing plates as shown in the illustration.

    NOTICE:
    Install the backing plates facing the correct direction.

  1. B117902E01
    Insert the wiper rubber from the front end of the wiper blade to the rear end through the second claw.

  1. After pushing the wiper rubber through the rear end claw, allow it to stick out from the rear end stopper.

  1. B117903E01
    Slide the wiper rubber through the front end claw.


2. INSTALL REAR WIPER BLADE ASSEMBLY

B133666
  1. Push the wiper blade straight toward the right side of the vehicle to install it to the wiper arm.

  1. B136381
    Lower the arm and blade.

  1. Rotate and install the cap.

← REMOVAL (from Nov 2005)PRECAUTION (Nov 2005 – Dec 2006) →