B1497/97 BUS IC Communication Malfunction
Diagnostic trouble codes · Vehicles built from Nov 2005
DESCRIPTION
The air conditioning harness connects the air conditioning amplifier and the servos. The air conditioning amplifier supplies power and sends operation instructions to each servo through the air conditioning harness. Each servo sends damper position information to the air conditioning amplifier.| DTC No. |
DTC Detection Condition |
Trouble Area |
| B1497/97 |
Communication line error or open |
|
WIRING DIAGRAM


INSPECTION PROCEDURE
| 1. CHECK AIR CONDITIONING AMPLIFIER |
![]() ![]() |
Remove the air conditioning amplifier with its connectors still connected.
Measure the resistance of the wire harness side connector.
- Standard resistance:
Tester Connection
Specified Condition
c1-2 (BUS G) - Body ground
Below 1 Ω
|
|
||||
| OK | |
| 2. INSPECT AIR CONDITIONING AMPLIFIER |
![]() ![]() |
Remove the air conditioning amplifier with its connectors still connected.
Measure the voltage of the wire harness side connector.
- Standard voltage:
Tester Connection
Condition
Specified Condition
c1-2 (BUS G) - c1-4 (B BUS)
Ignition switch on (IG)
11 to 13 V
c1-2 (BUS G) - c1-3 (BUS)
Ignition switch on (IG)
Pulse generation
|
|
||||
| OK | ||
| ||


