ON-VEHICLE INSPECTION
Inspection · Vehicles built from Aug 2007
| DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| REMOVE FUEL PUMP RELAY |
Remove the fuel pump relay from the engine room No. 1 relay block.
| INSPECT RELAY |
Measure the resistance of the fuel pump relay.

- Standard resistance:
Tester Connection
Specified Condition
3 - 4
Below 1 Ω
3 - 5
Below 1 Ω
(when battery voltage is applied to terminals 1 and 2)
3 - 5
10 kΩ or more
3 - 4
10 kΩ or more
(when battery voltage is applied to terminals 1 and 2)
| INSTALL FUEL PUMP RELAY |
| CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
