VSC Warning Light Remains ON
Circuit diagnosis · Vehicles built Jan 2007 – Jul 2007
Versions by build date: Nov 2005 – Dec 2006 Jan 2007 – Jul 2007 Aug 2007 – Jul 2008
DESCRIPTION
The skid control ECU is connected to the combination meter via the CAN communication system.w/o Multi-information display:
If the skid control ECU stores any DTCs which relate to the VSC system, the VSC warning light comes on in the combination meter.
w/ Multi-information display:
If the skid control ECU stores any DTCs which relate to the VSC system, the master caution indicator light comes on and the warning message is displayed on the multi information display in the combination meter.
WIRING DIAGRAM




INSPECTION PROCEDURE
- NOTICE:
- When replacing the ABS and TRACTION actuator, perform the zero point calibration (Click here).
| 1. CHECK CAN COMMUNICATION SYSTEM |
Check if the CAN communication system DTC is output (Click here).
Result Result
Proceed to
DTC is not output
A
DTC is output
B
|
|
||||
| OK | |
| 2. INSPECT SKID CONTROL ECU CONNECTOR |
Check if the skid control ECU connector is securely connected.
- OK:
- The connector is securely connected.
|
|
||||
| OK | |
| 3. CHECK COMBINATION METER |
Check the combination meter (Click here).
|
|
||||
| OK | ||
| ||
