INSPECTION
Inspection · Vehicles built from Aug 2007
| INSPECT INTAKE MANIFOLD |
 |
- Using a precision straightedge and feeler gauge, measure the warpage of the contact surface of the cylinder head and intake air surge tank.
- Maximum warpage:
Item
|
Specified Condition
|
Intake manifold side
|
0.8 mm (0.031 in.)
|
Cylinder head side
|
0.2 mm (0.008 in.)
|
If the warpage is greater than the maximum, replace the manifold.
| INSPECT EXHAUST MANIFOLD |
 |
- Using a precision straightedge and feeler gauge, measure the surface contacting the cylinder head for warpage.
- Maximum warpage:
- 0.70 mm (0.0276 in.)
If the warpage is greater than the maximum, replace the manifold.