INSPECTION
Inspection · Vehicles built from Nov 2005
| INSPECT HEADLIGHT LEVELING SWITCH |
![]() ![]() |
Connect the positive (+) battery lead to terminal 1 and the negative (-) battery lead to terminal 4.
- Standard voltage:
Tester Connection
Switch Condition
Specified Condition
1 (+B) - 4 (E)
2 (T) - 4 (E)
0
0.87 to 0.93 V
1 (+B) - 4 (E)
2 (T) - 4 (E)
1
0.76 to 0.82 V
1 (+B) - 4 (E)
2 (T) - 4 (E)
2
0.66 to 0.72 V
1 (+B) - 4 (E)
2 (T) - 4 (E)
3
0.55 to 0.61 V
1 (+B) - 4 (E)
2 (T) - 4 (E)
4
0.44 to 0.50 V
1 (+B) - 4 (E)
2 (T) - 4 (E)
5
0.34 to 0.40 V
Inspect the switch illumination.
Connect the battery positive (+) lead to terminal 3 (ILL+) and the negative (-) lead to terminal 4(E), then check that the light comes on.
- OK:
- LED comes on.


