REMOVAL
Removal / installation · Vehicles built from Jan 2007
Versions by build date: Nov 2005 – Dec 2006 from Jan 2007
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
- CAUTION:
- Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
| 2. REMOVE NO. 1 SWITCH HOLE BASE |
![]() ![]() |
Using a screwdriver, detach the 4 clips.
Disconnect the connectors and remove the switch hole base.
| 3. REMOVE HEADLIGHT LEVELING SWITCH |
![]() ![]() |
Detach the 2 claws and remove the headlight leveling switch.



