INSTALLATION
Removal / installation · Vehicles built from Nov 2005
| 1. INSTALL FAN AND GENERATOR V BELT |
Using SST and 19 mm socket wrench, loosen the V-ribbed belt tensioner arm clockwise, then install the fan and generator V belt.

- SST
- 09216-42010
- NOTICE:
- Be sure to connect SST and the tools so that they are in line during use.
- When retracting the tensioner, turn it clockwise slowly for 3 seconds or more. Do not apply force rapidly.
- After the tensioner is fully retracted, do not apply force any more than necessary.
- Be sure to connect SST and the tools so that they are in line during use.
| 2. INSTALL FRONT SUSPENSION MEMBER REINFORCEMENT RH |
Install the reinforcement RH with the 4 bolts.
- Torque:
- 96 N*m{ 979 kgf*cm , 71 ft.*lbf }
| 3. INSTALL FRONT FENDER APRON RH |
| 4. INSTALL FRONT WHEEL RH |
| 5. INSTALL RADIATOR SUPPORT OPENING COVER |
