REMOVAL
Removal / installation · Vehicles built from Nov 2005
| 1. REMOVE RADIATOR SUPPORT OPENING COVER |
| 2. REMOVE FRONT WHEEL RH |
| 3. REMOVE FRONT FENDER APRON RH |
| 4. REMOVE FRONT SUSPENSION MEMBER REINFORCEMENT RH |
Remove the 4 bolts and reinforcement RH.
| 5. REMOVE FAN AND GENERATOR V BELT |
Using SST and 19 mm socket wrench, loosen the V-ribbed belt tensioner arm clockwise, then remove the fan and generator V belt.

- SST
- 09216-42010
- NOTICE:
- Be sure to connect SST and the tools so that they are in line during use.
- When retracting the tensioner, turn it clockwise slowly for 3 seconds or more. Do not apply force rapidly.
- After the tensioner is fully retracted, do not apply force any more than necessary.
- Be sure to connect SST and the tools so that they are in line during use.
