REASSEMBLY
Removal / installation · Vehicles built from Aug 2008
Versions by build date: Nov 2005 – Jul 2008 from Aug 2008
| 1.
INSTALL NO. 3 ANTENNA CORD SUB-ASSEMBLY |
 |
- Attach the wire harness clamps to install the antenna cord.
| 2.
INSTALL NO. 2 INTERIOR ILLUMINATION LIGHT ASSEMBLY (w/ Illumination) |
 |
- Attach the wire harness clamps and rotate the lights in the direction shown in the illustration to install the interior illumination light.
| 3.
INSTALL NO. 1 INTERIOR ILLUMINATION LIGHT ASSEMBLY (w/ Illumination) |
 |
- Attach the claws to install the interior illumination light.
| 4.
INSTALL COOLER (ROOM TEMP. SENSOR) THERMISTOR (for Automatic Air Conditioning System) |
 |
- Attach the claws to install the cooler thermistor.
| 5.
INSTALL INSTRUMENT PANEL SAFETY PAD COVER (for LHD) |
 |
- Attach the 4 claws to install the instrument panel safety pad cover.
| 6.
INSTALL FUSE BOX OPENING COVER |
 |
- Attach the 2 claws and 2 clips to install the cover.
| 7.
INSTALL GLOVE COMPARTMENT DOOR STOPPER SUB-ASSEMBLY |
|