INSTALLATION
Removal / installation · Vehicles built from Aug 2007
| 1.
INSTALL PURGE VSV |
 |
- Install the purge VSV with the bolt.
-
Torque:
- 10 N*m{
102 kgf*cm
, 7 ft.*lbf
}
Connect the 2 purge line hoses to the purge VSV.
Connect the wire harness clamp.
Connect the purge VSV connector.
| 2.
INSTALL V-BANK COVER SUB-ASSEMBLY
|
 |
- Attach the 3 clips to install the engine cover.