2005-2008 RAV4 · Service Manual ENGINE

REASSEMBLY

Removal / installation · Vehicles built from Aug 2007


1. INSTALL OIL PUMP COVER

  1. A131928E01
    Install the drive and driven rotors into the timing chain cover with the rotors' marks facing the cylinder block. Check that the rotors turn smoothly.

  1. A132057E01
    Install the oil pump cover with the 8 bolts.

    Torque:
    9.1 N*m{ 93 kgf*cm , 81 in.*lbf }

    HINT:
    Bolt length:
    22 mm (0.87 in.) for bolt A

    40 mm (1.58 in.) for bolt B


2. INSTALL OIL PUMP RELIEF VALVE
  1. Coat the oil pump relief valve with engine oil.

  1. Install the relief valve and relief valve spring into the timing chain cover hole.

  1. A132097
    Using a 27 mm socket wrench, install the plug.

    Torque:
    49 N*m{ 500 kgf*cm , 36 ft.*lbf }

← REPLACEMENT (from Aug 2007)INSTALLATION (from Aug 2007) →