2005-2008 RAV4 · Service Manual BODY

DISASSEMBLY

Removal / installation · Vehicles built from Aug 2008

Versions by build date: Nov 2005 – Jul 2007 Aug 2007 – Jul 2008 from Aug 2008


1. REMOVE HOOD TO RADIATOR GRILLE SEAL

B208348E01
  1. Remove the 4 clips.

  1. Detach the 9 clips and remove the hood to radiator grille seal.


2. REMOVE RADIATOR GRILLE SUB-ASSEMBLY

B208461
  1. Remove the 3 bolts and 3 nuts.

  1. B208460
    Detach the 7 claws and guide, and remove the radiator grille.


3. REMOVE LOWER NO. 1 RADIATOR GRILLE

B208462
  1. Detach the 16 claws and remove the lower No. 1 radiator grille.


4. REMOVE LOWER NO. 2 RADIATOR GRILLE

B208463
  1. Detach the 12 claws and 3 guides, and remove the lower No. 2 radiator grille.


5. REMOVE FRONT BUMPER ARM EXTENSION LH

B208465
  1. Using a clip remover, remove the clip.

  1. Remove the screw.

  1. Detach the claw and remove the arm extension.


6. REMOVE FRONT BUMPER ARM EXTENSION RH

HINT:
Use the procedure described for the LH side.


7. REMOVE FRONT BUMPER BAR

B208340E01
  1. Using a heat light, heat the bumper cover and bumper bar.

    Standard:
    Item
    Specified Condition
    Bumper cover
    20 to 30°C (68 to 86°F)
    Bumper bar
    20 to 30°C (68 to 86°F)

    NOTICE:
    Do not heat the bumper cover and bumper bar excessively.

  1. Insert a piano wire between the bumper cover and bumper bar.

  1. Tie objects that can serve as handles (for example, wooden blocks) to both wire ends.

  1. Pull the piano wire and scrape off the double-sided tape that holds the bumper bar to the bumper cover.

    NOTICE:
    Be careful not to damage the bumper cover.


8. REMOVE FRONT BUMPER EXTENSION MOUNTING BRACKET

B208327
  1. Remove the 2 screws.

  1. Detach the 2 claws and remove the mounting bracket.


9. REMOVE FRONT BUMPER HOLE COVER LH

  1. Detach the 4 claws and remove the hole cover.

    B209238E01


10. REMOVE FRONT BUMPER HOLE COVER RH

HINT:
Use the procedure described for the LH side.


11. REMOVE FOG LIGHT ASSEMBLY LH (w/ Fog Light)

B208469
  1. Remove the screw.

  1. Detach the 2 guides and remove the fog light.


12. REMOVE FOG LIGHT ASSEMBLY RH (w/ Fog Light)

HINT:
Use the procedure described for the LH side.


13. REMOVE FRONT BUMPER EXTENSION LH (for Wide Body)

B208471
  1. Remove the screw.

  1. Detach the 6 clips and remove the extension.


14. REMOVE FRONT BUMPER EXTENSION RH (for Wide Body)

HINT:
Use the procedure described for the LH side.

← DISASSEMBLY (Aug 2007 – Jul 2008)REASSEMBLY (Nov 2005 – Jul 2007) →