DISASSEMBLY
Removal / installation · Vehicles built Aug 2007 – Jul 2008
Versions by build date: Nov 2005 – Jul 2007 Aug 2007 – Jul 2008 from Aug 2008
| 1.
REMOVE HOOD TO RADIATOR GRILLE SEAL |
 |
- Detach the 9 clips and remove the hood to radiator grille seal.
| 2.
REMOVE RADIATOR GRILLE SUB-ASSEMBLY |
 |
- Remove the 4 bolts and 4 nuts.
- Detach the 6 claws and remove the radiator grille.
| 3.
REMOVE NO. 1 RADIATOR GRILLE LOWER |
 |
w/ Headlight Cleaner:
Remove the headlight cleaner hose (Click here).
- Detach the 16 claws and remove the radiator grille.
| 4.
REMOVE NO. 2 RADIATOR GRILLE LOWER |
 |
- Detach the 16 claws and remove the radiator grille.
| 5.
REMOVE FRONT BUMPER ARM HOLE COVER LH |
 |
- Detach the 2 claws and disconnect the arm hole cover.
Remove the hook and bumper arm hole cover.
| 6.
REMOVE FRONT BUMPER ARM HOLE COVER RH |
 |
- HINT:
- Use the same procedures described for the LH side.
| 7.
REMOVE FRONT BUMPER EXTENSION MOUNTING BRACKET (w/ Front Bumper Extension Mounting Bracket) |
 |
Remove the 2 screws.
Detach the 3 claws and bracket.
| 8.
REMOVE FOG LIGHT ASSEMBLY LH |
 |
- Remove the screw and fog light.
Remove the 3 bolts and fog light mounting bracket.
| 9.
REMOVE FOG LIGHT ASSEMBLY RH |
 |
- HINT:
- Use the same procedures described for the LH side.
| 10.
REMOVE FRONT BUMPER HOLE COVER LH (w/o Fog Light) |
 |
- Remove the 3 bolts, bumper hole cover and fog light mounting bracket.
| 11.
REMOVE FRONT BUMPER HOLE COVER RH (w/o Fog Light) |
 |
- HINT:
- Use the same procedures described for the LH side.
| 12.
REMOVE FRONT BUMPER EXTENSION LH (for Wide Body) |
 |
- Detach the 7 outside moulding retainers and remove the extension LH.
- NOTICE:
- If reusing the extension, take care not to damage the extension.
- Be careful not to damage the vehicle body.
| 13.
REMOVE FRONT BUMPER EXTENSION RH (for Wide Body) |
 |
- HINT:
- Use the same procedures described for the LH side.