INSPECTION
Inspection · Vehicles built from Nov 2005
| INSPECT TRANSMISSION WIRE |
Disconnect the B27 wire connector.

Measure the resistance of the transmission wire.
- Standard resistance:
Tester Connection
Specified Condition
1 (THO) - 6 (E2)
90 Ω to 156 kΩ
1 (THO) - Body ground
1 MΩ or higher
6 (E2) - Body ground
1 MΩ or higher
- HINT:
- If the resistance is not as specified for either of the ATF temperatures shown in the table below, the driveability of the vehicle may decrease.
- Standard resistance:
ATF Temperature
Specified Condition
10°C (68°F)
6.4 kΩ
110°C (230°F)
0.2 kΩ
