INSPECTION
Inspection · Vehicles built from Aug 2007
| INSPECT TRANSMISSION WIRE |
 |
- Measure the resistance according to the value(s) in the table below.
- Standard resistance:
Tester Connection
|
Specified Condition
|
1 (THO) - 6 (E2)
|
90 Ω to 156 kΩ
|
1 (THO) - Body ground
|
1 MΩ or higher
|
6 (E2) - Body ground
|
1 MΩ or higher
|
If the result is not as specified, replace the wire.
- HINT:
- If the resistance is not as specified for either of the ATF temperatures shown in the table below, the drivability of the vehicle may decrease.
- Standard resistance:
ATF Temperature
|
Specified Condition
|
10°C (50°F)
|
6.4 kΩ
|
110°C (230°F)
|
0.2 kΩ
|