2005-2008 RAV4 · Service Manual STEERING

DTC CHECK / CLEAR

Troubleshooting · Vehicles built from Nov 2005

B127990E01

CHECK DTC
  1. Connect the intelligent tester to the DLC3.

  2. Turn the engine switch on (IG) and press the intelligent tester main switch ON.

  3. Read the DTCs by following the display on the intelligent tester.

    HINT:
    Refer to the intelligent tester operator's manual for further details.


CLEAR DTC
  1. Connect the intelligent tester to the DLC3.

  2. Turn the engine switch on (IG) and press the intelligent tester main switch ON.

  3. Clear the DTCs by following the display on the intelligent tester.

  4. Turn the engine switch off.

  5. Disconnect the intelligent tester from the DLC3.

← DIAGNOSIS SYSTEM (from Nov 2005)DATA LIST / ACTIVE TEST (from Nov 2005) →