B2789 No Response from ID BOX
Diagnostic trouble codes · Vehicles built Nov 2005 – Dec 2006
Versions by build date: Nov 2005 – Dec 2006 from Jan 2007
DESCRIPTION
This DTC is output when the certification ECU does not receive LIN communication signals from the ID code box via LIN for 10 seconds.| DTC No. |
DTC Detection Condition |
Trouble Area |
| B2789 |
Certification ECU does not receive LIN communication signals from ID code box via LIN for 10 seconds |
|
WIRING DIAGRAM


INSPECTION PROCEDURE
| 1. CHECK FOR DTC |
Clear the DTC (Click here).
Recheck for the DTC.
- OK:
- B2789 output does not reoccur.
|
|
||||
| NG | |
| 2. CHECK WIRE HARNESS (CERTIFICATION ECU - ID CODE BOX) |


Disconnect the E63 ECU connector.
Disconnect the E51 box connector.
Measure the resistance of the wire harness connectors.
- Standard resistance:
Tester Connection
Specified Condition
LIN (E63-10) - LIN1 (E51-3)
Below 1 Ω
LIN (E63-10) or LIN1 (E51-3) - Body ground
10 kΩ or higher
|
|
||||
| OK | |
| 3. CHECK ECU AGGREGATION BOX (OPERATION) |
Temporarily replace the ECU aggregation box (certification ECU) with a new or normally functioning one.
Check for a DTC.
- OK:
- B2789 is not output.
|
|
||||
| OK | ||
| ||
