2005-2008 RAV4 · Service Manual ENGINE

REMOVAL

Removal / installation · Vehicles built from Nov 2005


1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.


2. REMOVE AIR-FUEL RATIO SENSOR

  1. A126972
    Disconnect the sensor connector.

  1. A126973E01
    Using SST, remove the sensor from the front exhaust pipe.
    SST
    09224-00010  


3. REMOVE TAILPIPE ASSEMBLY
  1. Remove the 2 bolts and 2 compression springs.

  1. Disconnect the 2 exhaust pipe supports, and remove the tailpipe.

  1. Remove the gasket from the front exhaust pipe.

    A126834


4. REMOVE FRONT EXHAUST PIPE ASSEMBLY
  1. Remove the 2 bolts and 2 compression springs.

  1. Disconnect the 3 exhaust pipe supports, and remove the front exhaust pipe.

  1. Remove the gasket from the exhaust manifold.

    A126833

← COMPONENTS (from Nov 2005)INSTALLATION (from Nov 2005) →