TERMINALS OF ECU
System information · Vehicles built Nov 2005 – Jul 2008
Versions by build date: Nov 2005 – Jul 2008 from Aug 2008
| CHECK COMBINATION METER ASSEMBLY (METER ECU) |


Disconnect the E22 meter connector.
Measure the voltage and resistance of the wire harness side connector.
Symbols (Terminal No.)
Wiring Color
Terminal Description
Condition
Specified Condition
TXI+ (E22-11) - Body ground
G - Body ground
Ground (ambient temperature sensor ground)
Always
10 kΩ or higher
E (E22-12) - Body ground
BR - Body ground
Ground (fuel gauge ground)
Always
10 kΩ or higher
IG+ (E22-21) - Body ground
B - Body ground
Ignition power supply
Ignition switch off
Below 1 V
IG+ (E22-21) - Body ground
B - Body ground
Ignition power supply
Ignition switch on (IG)
10 to 14 V
B (E22-22) - Body ground
R - Body ground
Battery power supply
Always
10 to 14 V
ET (E22-33) - Body ground
BR - Body ground
Ground (meter ground)
Always
Below 1 Ω
SW3 (E22-34) - Body ground
O - Body ground
Ground (rheostat ground)
Always
10 kΩ or higher
- If the result is not as specified, there may be a malfunction on the wire harness side.
- If the result is not as specified, there may be a malfunction on the wire harness side.
Reconnect the E22 meter connector.
Measure the voltage of the connector.
Symbols (Terminal No.)
Wiring Color
Terminal Description
Condition
Specified Condition
PBLT (E22-1) - Body ground
LG - Body ground
Front passenger side seat belt condition output signal
Seat belt indicator is OFF
10 to 14 V
PBLT (E22-1) - Body ground
LG - Body ground
Front passenger side seat belt condition output signal
Seat belt indicator blinking
Below 1 V → 10 to 14 V
B (E22-3) - Body ground
Y - Body ground
Turn signal L
Ignition switch on (IG), turn signal LH indicator light OFF
Below 1 V
B (E22-3) - Body ground
Y - Body ground
Turn signal L
Ignition switch on (IG), turn signal LH indicator light ON
10 to 14 V
TIRE (E22-5) - Body ground
P - Body ground
Tire pressure warning signal
Tire pressure warning indicator ON
4 to 8 V
TIRE (E22-5) - Body ground
P - Body ground
Tire pressure warning signal
Tire pressure warning indicator OFF
Below 1 V
S (E22-6) - Body ground
L - Body ground
Low engine oil pressure warning signal
Low engine oil pressure warning light ON
Below 1 V
S (E22-6) - Body ground
L - Body ground
Low engine oil pressure warning signal
Low engine oil pressure warning light OFF
10 to 14 V
EFI (E22-8) - Body ground
R - Body ground
MIL
MIL ON
Below 4.2 V
EFI (E22-8) - Body ground
R - Body ground
MIL
MIL OFF
10 to 14 V
MSCH*1 (E22-9) - Body ground
LG - Body ground
CAN (Middle speed)
Ignition switch on (IG)
Pulse generation
MSCL*1 (E22-10) - Body ground
W - Body ground
CAN (Middle speed)
Ignition switch on (IG)
Pulse generation
CHG- (E22-13) - Body ground
L - Body ground
MIL
MIL ON
Below 1.5 V
CHG- (E22-13) - Body ground
L - Body ground
MIL
MIL OFF
10 to 14 V
SW (E22-14) - Body ground
Y - Body ground
Brake fluid level signal
Brake fluid level warning light ON
Below 1 V
SW (E22-14) - Body ground
Y - Body ground
Brake fluid level signal
Brake fluid level warning light OFF
10 to 14 V
S*2 (E22-16) - Body ground
R - Body ground
Fuel filter warning signal
Ignition switch on (IG), fuel filter warning displayed on multi-information display
10 to 14 V
S*2 (E22-16) - Body ground
R - Body ground
Fuel filter warning signal
Ignition switch on (IG), nothing displayed on multi-information display
Below 1 V
TEMP (E22-23) - Body ground
W - Body ground
Ambient temperature sensor signal
Ignition switch on (IG)
1 to 2 V (25°C (77°F))
OILW*2 (E22-24) - Body ground
G - Body ground
Engine oil level warning signal
Ignition switch on (IG), engine oil level warning displayed on multi-information display
10 to 14 V
OILW*2 (E22-24) - Body ground
G - Body ground
Engine oil level warning signal
Ignition switch on (IG) and water temperature 78°C (172.4°F), nothing displayed on multi-information display
Below 1 V
L (E22-25) - Body ground
L - Body ground
Fuel level signal
Ignition switch on (IG), fuel level is FULL
Below 1 V
L (E22-25) - Body ground
L - Body ground
Fuel level signal
Ignition switch on (IG), fuel level is EMPTY
4 to 7 V
SW1 (E22-26) - Body ground
V - Body ground
Light control rheostat signal
Ignition switch on (IG)
4 to 6 V
SW2 (E22-27) - Body ground
GR - Body ground
Light control rheostat signal
Ignition switch on (IG), rheostat knob position MIN → MAX
Below 1 V → 4 to 6 V
ILL+ (E22-28) - Body ground
G - Body ground
Illumination signal
Taillight OFF
Below 1 V
ILL+ (E22-28) - Body ground
G - Body ground
Illumination signal
Taillight ON
10 to 14 V
PBLT (E22-29) - Body ground
L - Body ground
Front passenger side seat belt condition input signal
Seat belt indicator is OFF
Below 1 V
PBLT (E22-29) - Body ground
L - Body ground
Front passenger side seat belt condition input signal
Seat belt indicator blinking
10 to 14 V
TC (E22-30) - Body ground
G - Body ground
Tail cancel switch signal
Ignition switch on (IG), tail cancel switch OFF
4 to 6 V
TC (E22-30) - Body ground
G - Body ground
Tail cancel switch signal
Ignition switch on (IG), tail cancel switch ON
Below 1 V
CANL (E22-31) - Body ground
W - Body ground
CAN communication line
Ignition switch on (IG)
Pulse generation
CANH (E22-32) - Body ground
G - Body ground
CAN communication line
Ignition switch on (IG)
Pulse generation
SI (E22-38) - Body ground
V - Body ground
Speed signal (input)
Ignition switch on (IG), slowly turn wheel
Pulse generation
+S (E22-39) - Body ground
V - Body ground
Speed signal (output) (4P-OUT)
Ignition switch on (IG), slowly turn wheel
Pulse generation
B (E22-40) - Body ground
L - Body ground
Turn signal R
Ignition switch on (IG), turn signal RH indicator light OFF
Below 1 V
B (E22-40) - Body ground
L - Body ground
Turn signal R
Ignition switch on (IG), turn signal RH indicator light ON
10 to 14 V
- HINT:
- *1: w/ Entry and start system
- *2: for Diesel engine
- If the result is not as specified, the combination meter may be malfunctioning.








| Terminal No. |
Wire Harness Side |
|
| E22 |
1 |
Seat Belt Warning Light for Passenger's Seat |
| 2 |
- |
|
| 3 |
Turn Signal Flasher |
|
| 4 |
- |
|
| 5 |
Tire Pressure Warning ECU |
|
| 6 |
Low Oil Pressure Warning Switch |
|
| 7 |
- |
|
| 8 |
ECM |
|
| 9 |
CAN-Hi (Middle speed)*1 |
|
| 10 |
CAN-Lo (Middle speed)*1 |
|
| 11 |
Ambient Temperature Sensor (GND) |
|
| 12 |
Fuel Sender Gauge (GND) |
|
| 13 |
Generator Assembly |
|
| 14 |
Brake Fluid Level Warning Switch |
|
| 15 |
- |
|
| 16 |
Fuel Filter Warning Switch*2 |
|
| 17 |
- |
|
| 18 |
- |
|
| 19 |
- |
|
| 20 |
- |
|
| 21 |
Ignition Switch |
|
| 22 |
Battery |
|
| 23 |
Ambient Temperature Sensor |
|
| 24 |
Engine Oil Level Sensor*2 |
|
| 25 |
Fuel Sender Gauge |
|
| 26 |
Rheostat (Output) |
|
| 27 |
Rheostat (Input) |
|
| 28 |
Headlight Dimmer Switch (Light Control Switch) |
|
| 29 |
Seat Belt Warning Light for Passenger's Seat |
|
| 30 |
Tail Cancel |
|
| 31 |
CAN-Lo |
|
| 32 |
CAN-Hi |
|
| 33 |
GND |
|
| 34 |
Rheostat (GND) |
|
| 35 |
Other Devices (GND) |
|
| 36 |
- |
|
| 37 |
- |
|
| 38 |
ABS and Traction Actuator*3 (Skid Control ECU), Brake Actuator*4 (Skid Control ECU) (SP) |
|
| 39 |
ECM (4P-OUT) |
|
| 40 |
Turn Signal Flasher |
|
- HINT:
- *1: w/ Entry and start system
- *2: for Diesel engine
- *3: w/ VSC
- *4: w/o VSC