2005-2008 RAV4 · Service Manual BODY ELECTRICAL

TERMINALS OF ECU

System information · Vehicles built from Aug 2008

Versions by build date: Nov 2005 – Jul 2008 from Aug 2008


CHECK COMBINATION METER ASSEMBLY (METER ECU)
E124213E02
  1. Disconnect the E22 meter connector.

  2. Measure the voltage and resistance of the wire harness side connector.

    Symbols (Terminal No.)
    Wiring Color
    Terminal Description
    Condition
    Specified Condition
    TXI+ (E22-11) - Body ground
    G - Body ground
    Ground (ambient temperature sensor ground)
    Always
    10 kΩ or higher
    E (E22-12) - Body ground
    BR - Body ground
    Ground (fuel gauge ground)
    Always
    10 kΩ or higher
    IG+ (E22-21) - Body ground
    B - Body ground
    Ignition power supply
    Ignition switch off
    Below 1 V
    IG+ (E22-21) - Body ground
    B - Body ground
    Ignition power supply
    Ignition switch on (IG)
    11 to 14 V
    B (E22-22) - Body ground
    R - Body ground
    Battery power supply
    Always
    11 to 14 V
    ET (E22-33) - Body ground
    BR - Body ground
    Ground (meter ground)
    Always
    Below 1 Ω
    SW3 (E22-34) - Body ground
    P - Body ground
    Ground (rheostat ground)
    Always
    10 kΩ or higher
    ILL- (E22-35) - Body ground
    BR - Body ground
    Ground
    Always
    Below 1 Ω
    1. If the result is not as specified, there may be a malfunction on the wire harness side.

  3. Reconnect the E22 meter connector.

  4. Measure the voltage of the connector.

    Symbols (Terminal No.)
    Wiring Color
    Terminal Description
    Condition
    Specified Condition
    B (E22-1) - Body ground
    L - Body ground
    Turn signal R
    Ignition switch on (IG), turn signal RH indicator light OFF
    Below 1 V
    B (E22-1) - Body ground
    L - Body ground
    Turn signal R
    Ignition switch on (IG), turn signal RH indicator light ON
    11 to 14 V
    ILL+ (E22-2) - Body ground
    G - Body ground
    Illumination signal
    Taillight OFF
    Below 1 V
    ILL+ (E22-2) - Body ground
    G - Body ground
    Illumination signal
    Taillight ON
    11 to 14 V
    B (E22-3) - Body ground
    Y - Body ground
    Turn signal L
    Ignition switch on (IG), turn signal LH indicator light OFF
    Below 1 V
    B (E22-3) - Body ground
    Y - Body ground
    Turn signal L
    Ignition switch on (IG), turn signal LH indicator light ON
    11 to 14 V
    S (E22-6) - Body ground
    L - Body ground
    Low engine oil pressure warning signal
    Low engine oil pressure warning light ON
    Below 1 V
    S (E22-6) - Body ground
    L - Body ground
    Low engine oil pressure warning signal
    Low engine oil pressure warning light OFF
    11 to 14 V
    EFI (E22-8) - Body ground
    R - Body ground
    MIL
    MIL ON
    Below 4.2 V
    EFI (E22-8) - Body ground
    R - Body ground
    MIL
    MIL OFF
    11 to 14 V
    CHG- (E22-13) - Body ground
    L - Body ground
    MIL
    MIL ON
    Below 1.5 V
    CHG- (E22-13) - Body ground
    L - Body ground
    MIL
    MIL OFF
    11 to 14 V
    SW (E22-14) - Body ground
    Y - Body ground
    Brake fluid level signal
    Brake fluid level warning light ON
    Below 1 V
    SW (E22-14) - Body ground
    Y - Body ground
    Brake fluid level signal
    Brake fluid level warning light OFF
    11 to 14 V
    S* (E22-16) - Body ground
    R - Body ground
    Fuel filter warning signal
    Ignition switch on (IG), fuel filter warning displayed on multi-information display
    11 to 14 V
    S* (E22-16) - Body ground
    R - Body ground
    Fuel filter warning signal
    Ignition switch on (IG), nothing displayed on multi-information display
    Below 1 V
    OILW* (E22-17) - Body ground
    G - Body ground
    Engine oil level warning signal
    Ignition switch on (IG), engine oil level warning displayed on multi-information display
    11 to 14 V
    OILW* (E22-17) - Body ground
    G - Body ground
    Engine oil level warning signal
    Ignition switch on (IG) and water temperature 78°C (172.4°F), nothing displayed on multi-information display
    Below 1 V
    L (E22-24) - Body ground
    Y - Body ground
    Fuel level signal
    Ignition switch on (IG), fuel level is FULL
    Below 1 V
    L (E22-24) - Body ground
    Y - Body ground
    Fuel level signal
    Ignition switch on (IG), fuel level is EMPTY
    4 to 7 V
    SW1 (E22-26) - Body ground
    V - Body ground
    Light control rheostat signal
    Ignition switch on (IG)
    4 to 6 V
    SW2 (E22-27) - Body ground
    GR - Body ground
    Light control rheostat signal
    Ignition switch on (IG), rheostat knob position MIN → MAX
    Below 1 V → 4 to 6 V
    TEMP (E22-28) - Body ground
    W - Body ground
    Ambient temperature sensor signal
    Ignition switch on (IG)
    1 to 2 V (25°C (77°F))
    PBLT (E22-29) - Body ground
    L - Body ground
    Front passenger side seat belt condition input signal
    Seat belt indicator OFF
    Below 1 V
    PBLT (E22-29) - Body ground
    L - Body ground
    Front passenger side seat belt condition input signal
    Seat belt indicator blinking
    11 to 14 V
    TC (E22-30) - Body ground
    G - Body ground
    Tail cancel switch signal
    Ignition switch on (IG), tail cancel switch OFF
    4 to 6 V
    TC (E22-30) - Body ground
    G - Body ground
    Tail cancel switch signal
    Ignition switch on (IG), tail cancel switch ON
    Below 1 V
    CANL (E22-31) - Body ground
    W - Body ground
    CAN communication line
    Ignition switch on (IG)
    Pulse generation
    CANH (E22-32) - Body ground
    G - Body ground
    CAN communication line
    Ignition switch on (IG)
    Pulse generation
    SI (E22-38) - Body ground
    V - Body ground
    Speed signal (input)
    Ignition switch on (IG), wheel turned slowly
    Pulse generation
    +S (E22-39) - Body ground
    V - Body ground
    Speed signal (output) (4P-OUT)
    Ignition switch on (IG), wheel turned slowly
    Pulse generation
    PBLT (E22-40) - Body ground
    LG - Body ground
    Front passenger side seat belt condition output signal
    Seat belt indicator OFF
    11 to 14 V
    PBLT (E22-40) - Body ground
    LG - Body ground
    Front passenger side seat belt condition output signal
    Seat belt indicator blinking
    Below 1 V → 11 to 14 V
    *: for Diesel Engine
    If the result is not as specified, the combination meter may be malfunctioning.

    1. E174411E02

    2. E174412E02

      E174413E02

      E174588E02

Table of terminal connection 
Terminal No.
Wire Harness Side
E22
1
Turn Signal Flasher
2
Headlight Dimmer Switch (Light Control Switch)
3
Turn Signal Flasher
4
-
5
-
6
Low Oil Pressure Warning Switch
7
-
8
ECM
9
-
10
-
11
Ambient Temperature Sensor (GND)
12
Fuel Sender Gauge (GND)
13
Generator Assembly
14
Brake Fluid Level Warning Switch
15
-
16
Fuel Filter Warning Switch*1
17
Engine Oil Level Sensor*1
18
Steering Pad Switch
19
-
20
-
21
Ignition Switch
22
Battery
23
-
24
Fuel Sender Gauge
25
-
26
Rheostat (Output)
27
Rheostat (Input)
28
Ambient Temperature Sensor
29
Seat Belt Warning Light for Passenger's Seat
30
Tail Cancel
31
CAN-Lo
32
CAN-Hi
33
GND
34
Rheostat
35
Other Devices (GND)
36
-
37
-
38
ABS and Traction Actuator*2 (Skid Control ECU), Brake Actuator*3 (Skid Control ECU) (SP)
39
Other Devices (4P-OUT)
40
Seat Belt Warning Light for Passenger's Seat
*1: for Diesel Engine
*2: w/ VSC
*3: w/o VSC
← TERMINALS OF ECU (Nov 2005 – Jul 2008)DIAGNOSIS SYSTEM (from Nov 2005) →